Serving the Indianapolis area  ·  (463) 209-8558  ·  Open Mon-Sun 7am-7pm
📞 (463) 209-8558 Free Quote

Metal Roofing in Speedway, IN (46224) · Local Professionals

Indianapolis Metal Roofing · Fast response in Speedway and the Indianapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+240Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Speedway is a small, tight-knit town wrapped around the Indianapolis Motor Speedway, and its post-war bungalows and brick ranches in the 46224 ZIP code are showing their age. Most of these homes were built between 1940 and 1960, with low-pitched shingle roofs that have been patched, layered, and baked by decades of Indiana summers.

Homeowners here call Indianapolis Metal Roofing because we understand the specific challenges of Speedway: narrow lots, mature trees that drop limbs on roofs, and the constant freeze-thaw cycle that loosens fasteners and flashing. Whether you are near the track on Georgetown Road or over by Speedway High School, we provide metal roofing installation, repair, and replacement that stands up to central Indiana weather.

Metal Roofing in Speedway (46224)

Speedway sits on the flat glacial till plain of Marion County, and the housing stock reflects its mid-century growth. You will find small bungalows and Cape Cods with steep gables, brick ranches with low-slope roofs, and a few older farmhouses on the edges of town. The soil is heavy clay in many spots, which can affect drainage around foundations, and the mature maples and oaks that line the streets drop leaves and limbs that clog gutters and puncture shingles. The freeze-thaw cycles in winter are relentless, and ice dams form at the eaves on homes with poor attic insulation. We have seen it all in Speedway, from wind-lifted panels after a spring storm to rusted screw heads on older metal roofs that need re-fastening.

Our team has been serving Speedway and the surrounding Indianapolis area for years, and we know the local building department requirements, the historic district considerations near the track, and the kind of weather your roof has to handle. We are fully insured with general liability and workers' compensation, so you are protected from start to finish.

Our services in Speedway

How a Job Works in Speedway

Step 1: You call us at (463) 209-8558 or request a free estimate online. We schedule an on-site assessment at your Speedway home, usually within a few days. We inspect your existing roof, check the attic and flashing, and talk with you about what you want: a full replacement, a repair, or a retrofit over your current shingles. We provide a written estimate with clear pricing and options.

Step 2: Once you approve, we pull the necessary permits from the City of Speedway building department and schedule the work. On installation day, our crew arrives early, protects your landscaping with tarps, and gets to work. Many Speedway homes have tight driveways and narrow side yards, so we plan material delivery and staging carefully to avoid blocking neighbors. If your home is in a historic area or under an HOA, we coordinate any required design review before ordering materials.

Step 3: After the roof is installed, we do a thorough cleanup, magnet-sweep the yard for nails, and walk the property with you to make sure everything meets your expectations. We do not leave until you are satisfied, and we back our work with a warranty.

Pricing for metal roofing in Speedway depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over your existing shingles, our retrofit option starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We always provide a free estimate so you know exactly what your project will cost before we begin. Call (463) 209-8558 to schedule yours.

My Speedway bungalow has a low-pitched roof and original shingles from the 1950s. Can I install metal roofing over them?
In many cases, yes. Indiana code allows a metal roof over existing shingles if the roof structure can handle the added weight and if there is only one layer of shingles. However, we always inspect the decking and flashing first. For older Speedway homes, we often recommend a full tear-off to check for rot and to ensure proper ventilation, especially if you have had leaks or ice dams.
A storm just blew through Speedway and lifted some panels on my metal roof. Can you fix it quickly?
Yes. We offer storm and wind damage repair with free inspections. Call us at (463) 209-8558, and we will schedule a prompt assessment. We can often make temporary repairs to prevent further damage and then order matching panels for a permanent fix. We also help document damage for insurance claims, but please note that coverage and deductibles are determined by your policy.
How much does a typical metal roof replacement cost for a 1,200-square-foot ranch in Speedway?
For a home that size, a basic corrugated or ribbed panel roof might start around $6,000 to $8,000, while standing seam could run $12,000 to $15,000. Factors like roof pitch, number of penetrations, and whether we need to replace decking will affect the final price. We provide a detailed free estimate after inspecting your roof.
Do I need a permit to replace my roof in Speedway, and how long does it take?
Yes, the City of Speedway requires a permit for roof replacements. The process usually takes a few business days, and we handle the application for you. We also ensure the work meets local code and schedule inspections as required. If your home is in a historic district, additional design review may be needed, and we can guide you through that.
My neighbor's tree hangs over my property line and drops limbs on my roof. What are my options?
Indiana law generally allows you to trim branches that overhang your property, but you should check with your neighbor first and avoid damaging the tree. If a limb falls and damages your roof, your homeowner's insurance may cover it. We can repair any damage and also install snow guards or heavier gauge panels to resist impacts. For HOA communities in Speedway, review your covenants for any restrictions on roofing materials or color.
Are you fully insured for roofing work in Speedway?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of an accident.
What maintenance should I do each fall to prevent ice dams on my Speedway home?
Clean your gutters to remove leaves and debris, and check that downspouts drain away from the foundation. Make sure your attic is properly insulated and ventilated to keep the roof deck cold. Before winter, we can inspect your roof for loose fasteners and worn seals, and apply a protective coating if needed. Ice dams form when heat escapes into the attic, so addressing insulation is key.
Why choose us?

Trusted professionals in Indianapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Indianapolis

All your work handled by qualified professionals in Indianapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

240+ Verified Client Reviews in Indianapolis

⭐⭐⭐⭐⭐ 4.9/5 · 240 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Indianapolis · Response within 24h · No commitment · ☎ (463) 209-8558

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Indianapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm