Serving the Indianapolis area  ·  (463) 209-8558  ·  Open Mon-Sun 7am-7pm
📞 (463) 209-8558 Free Quote

Metal Roofing in Fishers, IN (46037) · Local Professionals

Indianapolis Metal Roofing · Fast response in Fishers and the Indianapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+240Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fishers is a city of big, newer roofs on big lots, from the two-story subdivisions off 116th Street to the established neighborhoods near Geist Reservoir. If you live in the 46037 ZIP code, you know how spring storms roll across the flat farmland north of Indianapolis and hit those wide, low-pitch roofs hard.

We are Indianapolis Metal Roofing, and we have been installing, repairing, and replacing metal roofs across Fishers and the north side for years. When a hailstorm dents your shingles or a wind gust peels back a panel, our insured crew is just a short drive down I-69 or Fall Creek Road away.

Metal Roofing in Fishers (46037)

Fishers sits on flat glacial till, which means drainage is generally good, but the wide lots and large roof footprints common in neighborhoods like Gray Eagle and the Fishers Pointe area create long runs of roofing that are vulnerable to straight-line winds. Many homes here were built in the 1990s and 2000s with architectural shingles that are now reaching the end of their lifespan. We see a lot of wind-lifted shingles, loose fasteners, and ice damming at the eaves on north-facing slopes after a cold snap. The open farmland to the north and west gives storms a clear path, so hail and wind damage are a regular part of spring.

Our team knows the local building stock, from the newer construction off 126th Street to the older homes near the Nickel Plate District. We have worked on everything from simple ribbed panel roofs on garages to standing seam and stone-coated steel on custom homes. We understand the permit process with the City of Fishers and can help you navigate HOA requirements if your neighborhood has design standards.

Our services in Fishers

How a Job Works in Fishers

Step 1: Give us a call at (463) 209-8558 or request a free estimate online. We will schedule a time to come out and inspect your roof, whether it is a simple leak repair or a full replacement. We will walk the roof, check the flashing, fasteners, and panels, and give you a written estimate with clear options.

Step 2: Once you approve the scope, we pull the necessary permits with the City of Fishers and coordinate with your HOA if needed. Our crew arrives on time, protects your landscaping with tarps, and works efficiently. For tight lots or steep drives, we plan material staging carefully. We handle everything from tearing off the old roof to installing new underlayment and panels.

Step 3: After the work is done, we do a thorough cleanup, magnet sweep for nails, and a final walkthrough with you. We make sure you are satisfied and understand the warranty and maintenance requirements. We leave your property clean and your roof ready for the next Indiana season.

Metal roofing in Fishers is priced by the square foot and the complexity of the job. For a typical home, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits the number of layers you can have. Repairs start at $450, and leak repairs are in the same range. Screw replacement and re-fastening start at $750. For smaller jobs like flashing or chimney repair, expect around $600. We also offer free inspections for storm damage, so if you suspect hail or wind damage, call us first. The final cost depends on roof size, pitch, accessibility, and material choice. Call (463) 209-8558 for a free estimate tailored to your Fishers home.

My house is in the Gray Eagle neighborhood and we get a lot of wind. Are standing seam roofs better than shingles for wind resistance?
Yes, standing seam metal roofs are excellent for wind resistance because they have concealed fasteners and raised seams that lock together. They are rated for high winds and are a popular choice in Fishers neighborhoods like Gray Eagle where straight-line winds are common. We can help you choose the right panel profile for your home.
A storm just came through Fishers and I think my roof is damaged. How quickly can you inspect it?
We offer free storm and wind damage inspections and can usually schedule within a day or two after a storm. Call us at (463) 209-8558 to set up an appointment. We will document any damage for your insurance claim and provide a repair estimate.
What does a metal roof cost for a typical 2,000 square foot home in Fishers?
For a 2,000 square foot home, a basic corrugated or ribbed panel roof might start around $11,000 to $15,000, while standing seam could range from $20,000 to $30,000 depending on complexity. These are ballpark figures. Factors like roof pitch, number of penetrations, and material choice affect the final price. Call us for a free estimate.
Do I need a permit to replace my roof in Fishers?
Yes, the City of Fishers requires a permit for roof replacements. The requirements and fees can vary, so we recommend checking with the Fishers Building Department. We handle the permit application process for you as part of our service.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We are familiar with many Fishers HOA design standards and can provide color samples and documentation for your HOA submission. We will coordinate with your HOA to ensure the chosen metal roof meets their guidelines.
Are you fully insured for work in Fishers?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We can provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Fishers' climate?
In Fishers, metal roofs should be inspected annually, especially after spring storms. Check for loose fasteners, debris in valleys, and any signs of ice damming in winter. We recommend a professional inspection every few years to keep the roof in top shape. We offer maintenance plans.
Why choose us?

Trusted professionals in Indianapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Indianapolis

All your work handled by qualified professionals in Indianapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

240+ Verified Client Reviews in Indianapolis

⭐⭐⭐⭐⭐ 4.9/5 · 240 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Indianapolis · Response within 24h · No commitment · ☎ (463) 209-8558

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Indianapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm