Serving the Indianapolis area  ·  (463) 209-8558  ·  Open Mon-Sun 7am-7pm
📞 (463) 209-8558 Free Quote

Metal Roofing in Greenwood, IN (46143) · Local Professionals

Indianapolis Metal Roofing · Fast response in Greenwood and the Indianapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+240Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Greenwood is the kind of southside suburb where the housing stock tells its own story, from the tidy post-war brick ranches near the old downtown square to the sprawling 1990s and 2000s subdivisions out toward Center Grove. Those low-pitched shingle roofs have taken decades of Indiana hail, summer sun, and freeze-thaw winters, and a lot of them are ready for something that lasts.

Homeowners in ZIP 46143 call Indianapolis Metal Roofing because we know this ground. We have worked the streets around Craig Park and the Greenwood Community Center, and we understand how the flat glacial till and heavy spring storms treat a roof here. If your shingles are curling, granule loss is showing in the gutters, or you are tired of patching after every hail event, we can walk the roof and give you a straight answer.

Metal Roofing in Greenwood (46143)

Greenwood sits on the flat glacial till plain that runs south from Indianapolis, and that matters for roofing more than people realize. The soil holds water after heavy rain, so proper drainage at the eaves and downspout placement are not afterthoughts. Most of the housing here falls into two buckets: the older brick ranches and Cape Cods with low-slope shingle roofs, and the newer two-story subdivisions with steeper architectural shingle roofs. The older homes often have multiple layers of shingles, which affects whether a retrofit over shingles is allowed under local code. The newer homes tend to have tighter lot lines and HOA design rules that can restrict panel profile and color. Our crews handle both, and we know how to stage materials on a narrow driveway without tearing up your lawn.

We have installed standing seam, corrugated panel, metal shingle, and stone-coated steel roofs across Greenwood and the surrounding southside, from the neighborhoods near the Greenwood Park Mall to the quieter streets off State Road 135. Our team is fully insured with general liability and workers' compensation, and we pull permits through the City of Greenwood building department so the work is inspected and documented.

Our services in Greenwood

How a Job Works in Greenwood

Step 1: You call us at (463) 209-8558 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permit from the City of Greenwood and coordinate with your HOA if there is one. On installation day, our crew protects landscaping, removes the old roofing if needed, and installs the new metal system. On tight subdivision lots, we stage materials in the driveway and use magnetic sweepers throughout the day to keep nails out of the grass.

Step 3: We do a full cleanup, haul away debris, and walk the property with you. You get a final inspection sign-off and a walkthrough of the finished roof, including how the flashing and fasteners were done, so you know exactly what you paid for.

Pricing in Greenwood depends on the size and pitch of your roof, how many layers are already there, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and a full metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, which is often a good fit for the older ranches here if the deck and code allow it. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. Storm and wind damage inspections are free. Call (463) 209-8558 for a free estimate specific to your property.

My ranch near Craig Park has two layers of old shingles. Can you install metal over them?
Sometimes, yes, but it depends on the condition of the deck and how many layers are already there. Indiana code limits how many layers a roof can carry, and the City of Greenwood building department will verify that during permitting. We inspect the deck first and tell you honestly whether a retrofit makes sense or whether a full tear-off is the safer path.
A storm just peeled back panels on my roof in Greenwood. How fast can you get out?
We prioritize active leaks and storm damage. Call (463) 209-8558 and we will schedule an inspection, often same day or next day depending on volume. We can tarp or secure the area to prevent further water intrusion, then document the damage for your insurance claim. We never promise coverage, but we do provide the photos and paperwork your adjuster needs.
What does a typical metal roof cost for a Greenwood ranch or two-story subdivision home?
For a standard ranch, most homeowners are looking at the $8 to $12 per square foot range depending on the panel type and whether we tear off the old roof. Two-story subdivision homes with more complex rooflines run higher. Repairs start at $450. The biggest factors are square footage, roof pitch and complexity, number of existing layers, and whether you choose standing seam or a corrugated panel.
Do I need a permit for a metal roof in Greenwood, and who handles it?
Yes, a full replacement or re-roof typically requires a permit through the City of Greenwood building department. We pull the permit for you as part of the job. Requirements and fees can vary, so we confirm the specifics with the city before scheduling. If your home is in a historic district or HOA, there may be additional design review.
My HOA has rules about roof color and panel style. Can you help with approval?
We can. Many Greenwood subdivisions have architectural review requirements, and we provide product specs, color samples, and panel profiles you can submit to your HOA board. We are also careful about property lines and setback rules, so if a neighbor has a concern about runoff or fencing near the roofline, we address it before work begins.
Are you fully insured for work on my Greenwood property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. If you would like a certificate of insurance before work starts, just ask and we will provide it. Our team is fully insured so you are not exposed to liability if someone gets hurt or something gets damaged on your property.
What should I do to maintain a metal roof in Greenwood between seasons?
Indiana freeze-thaw cycles are the main culprit. Have the roof inspected in spring after hail season and in fall before winter. Check that gutters are clear of leaves from the maples and oaks, and look for loose fasteners or lifted flashing at chimneys and skylights. A coating or paint refresh every several years can extend the life of panel roofs. We offer free inspections so you can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Indianapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Indianapolis

All your work handled by qualified professionals in Indianapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

240+ Verified Client Reviews in Indianapolis

⭐⭐⭐⭐⭐ 4.9/5 · 240 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Indianapolis · Response within 24h · No commitment · ☎ (463) 209-8558

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Indianapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm