Serving the Indianapolis area  ·  (463) 209-8558  ·  Open Mon-Sun 7am-7pm
📞 (463) 209-8558 Free Quote

Metal Roofing in Franklin, IN (46131) · Local Professionals

Indianapolis Metal Roofing · Fast response in Franklin and the Indianapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+240Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Franklin, Indiana still has the kind of downtown that people drive in for: a brick courthouse square, older two-story storefronts, and tree-lined streets that fan out toward Franklin College. The housing stock follows that same pattern, with century-old homes near the square and along Jefferson Street, mid-century ranches and Cape Cods on the south and east sides, and newer subdivisions pushing out toward 46131's farmland edges. Lots are generous, many with mature maples and oaks that drop limbs and shade the roof for decades.

Homeowners in Franklin call Indianapolis Metal Roofing because we understand what this climate does to a roof. Snow sits on low-pitch porch roofs, ice dams form at the eaves after a January thaw, and spring straight-line winds peel back panels that were fastened for a gentler region.

Metal Roofing in Franklin (46131)

Franklin sits on the flat glacial till plain of central Indiana, which means heavy clay soils that drain slowly after a storm and frost that moves shallow footings and gutter anchors. The older homes near the Johnson County Courthouse square often have steep gables and small dormers, which makes flashing around chimneys and sidewalls fussy work. The post-war brick ranches south of Jefferson Street typically have low-slope roofs where ice dams are common, and the newer subdivisions off State Road 44 have tighter side yards that limit where we can stage panels and equipment. Farm properties on the edge of town bring their own challenge: open exposure to west and northwest wind, plus long roof runs on barns and machine sheds that need ribbed panel systems rather than standing seam.

Our team has installed, repaired, and replaced metal roofs across Johnson County for years. We know which Franklin neighborhoods have historic review, which HOAs restrict panel profiles, and which streets are narrow enough that we need to plan material delivery around school bus routes.

Our services in Franklin

How a Job Works in Franklin

Step 1: You call (463) 209-8558 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you. We check fasteners, seams, flashing, and attic ventilation, and we take photos so you can see exactly what we see. You get a written scope and a flat price before any work starts.

Step 2: Once you approve, we pull the permit with the City of Franklin building department if your project requires one (full replacements usually do, and historic district properties may need design review). We order materials, coordinate delivery around your driveway and street access, and protect landscaping before tear-off. Most residential roofs take two to five days depending on size, pitch, and weather.

Step 3: We clean the site daily and do a magnet sweep at the end. On the final walkthrough we show you the completed work, explain the warranty, and leave you with a clean yard and a roof that is ready for an Indiana winter.

Metal roofing in Franklin is priced by the square foot, and the numbers depend on the system you choose. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7, installation starts around $8, standing seam starts around $10, and copper or specialty metal starts around $20. Repairs start around $450, leak repairs around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. A typical 1,500 square foot ranch roof might land between $12,000 and $20,000 installed depending on panel type and complexity. Access, roof pitch, the number of penetrations, and whether we are tearing off old layers all affect the final number. Call (463) 209-8558 for a free estimate specific to your property.

My house is near the Franklin College campus and has a steep gable with a small dormer. Can you install standing seam without it looking out of place?
Yes. On older homes around Franklin College and the downtown historic district, we often use a narrower standing seam panel with a lower profile and a color that matches the existing trim. We can also fabricate pans on site to fit dormers and valleys tightly, which keeps the roof looking appropriate for the architecture.
A storm knocked a limb onto my roof on the south side of Franklin. How fast can you get out for an emergency repair?
We prioritize active leaks and storm damage. Call (463) 209-8558 and describe the damage. In most cases we can get an inspector to your property within 24 to 48 hours, and we can tarp or make temporary repairs the same day if water is entering the house.
What does a metal roof replacement cost on a typical three-bedroom ranch in Franklin?
Most ranch homes in Franklin run between 1,200 and 1,800 square feet of roof area. A basic corrugated panel replacement starts around $7,000 to $10,000, while standing seam on the same home typically runs $13,000 to $18,000. The exact price depends on pitch, tear-off, and how many penetrations need flashing.
Do I need a permit from the City of Franklin to replace my roof?
Full roof replacements generally require a permit from the City of Franklin building department, and the rules can vary depending on whether you are doing a tear-off or a recover. We handle the permit application and inspection scheduling for you. If your home is in a historic district, the city may also require design review before work begins.
My HOA in a Franklin subdivision requires approval for roof color. Can you help with that process?
Yes. We regularly work with HOAs in Franklin and Johnson County. We can provide color samples, manufacturer specifications, and a written description of the panel profile for your architectural review committee. We will not order materials until you have written approval, so there are no surprises.
Are you insured for work on my property in Franklin?
Yes. Indianapolis Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Franklin to prevent ice dams?
In Franklin, the biggest risk is ice damming at the eaves after a heavy snow followed by a thaw. Keep gutters clear in the fall so meltwater can drain, and make sure attic insulation and ventilation are adequate to keep the roof deck cold. We also recommend an annual inspection in late fall to check fasteners and flashing before winter sets in.
Why choose us?

Trusted professionals in Indianapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Indianapolis

All your work handled by qualified professionals in Indianapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

240+ Verified Client Reviews in Indianapolis

⭐⭐⭐⭐⭐ 4.9/5 · 240 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Indianapolis · Response within 24h · No commitment · ☎ (463) 209-8558

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Indianapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm