Serving the Indianapolis area  ·  (463) 209-8558  ·  Open Mon-Sun 7am-7pm
📞 (463) 209-8558 Free Quote

Metal Roofing in Indianapolis, IN (46204) · Local Professionals

Indianapolis Metal Roofing · Fast response in Indianapolis and the Indianapolis area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+240Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Indianapolis roofs take a beating. From the slate-topped Victorians in Fountain Square to the post-war brick ranches out by Garfield Park, every neighborhood here faces the same cycle: spring hail, summer sun, fall leaves, and winter freeze-thaw that works on fasteners and flashing until something gives.

We are Indianapolis Metal Roofing, and we work these streets every week. Whether you are near the Circle downtown or out in Irvington where the Craftsman bungalows have steep gables and original details, we know what fails first and how to fix it right. Call (463) 209-8558 for a free estimate.

Metal Roofing in Indianapolis (46204)

Marion County sits on flat glacial till, and that shapes the work. In older neighborhoods like Fletcher Place and Meridian-Kessler, lots are narrow and alleys are tighter than they look on a plat map, so staging panels and getting a lift in takes planning. The housing stock is just as varied: 1880s Italianate and Queen Anne homes with original slate and metal, 1920s Tudor and Colonial with steep pitches, low-slung Cape Cods and ranches across Beech Grove and Lawrence, and newer two-story subdivisions out in Carmel and Fishers where architectural shingles are now giving way to standing seam and stone-coated steel. Big maples, oaks, and sycamores hang over most of these roofs, which means leaf debris in valleys and gutters, and limbs that come down in a straight-line wind. The freeze-thaw cycle here is the quiet killer. Water works into fastener holes and flashing gaps, freezes overnight, and backs them out season after season. That is why we see so many active leaks that started as a loose screw and ended as a stained ceiling in a Broad Ripple bungalow. We handle all of it, from full standing seam installations on a Butler-Tarkington Tudor to screw replacement and re-fastening on a commercial building near the fairgrounds.

Our crews are based here and insured here, with general liability and workers' compensation coverage. We serve Indianapolis and the surrounding metro, from 46204 out to Zionsville, Avon, Brownsburg, Greenwood, and the Eastside.

Our services in Indianapolis

How a Job Works in Indianapolis

Step 1: You call (463) 209-8558 or request an estimate online. We schedule a free on-site assessment, walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written scope with options, not a pressure pitch.

Step 2: Once you approve, we pull the required roofing permit through the local building department and coordinate any historic district or HOA review, which comes up often in Irvington and parts of Meridian-Kessler. On tight lots in Fountain Square, we plan panel delivery and staging around alley access and street parking. Then the work begins: tear-off or retrofit, deck inspection, underlayment, panels or shingles, and flashing done to code.

Step 3: We clean the site daily and do a final walkthrough with you. Magnets go over the lawn and driveway for nails, gutters get checked, and we do not leave until you have seen the finished work and understand the warranty.

Pricing in Indianapolis depends on the roof, not just the square footage. Metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney repair at $600, and gutters for metal roofs at $9 per linear foot. Snow guards and ice protection start at $1,200. The big variables are roof size and pitch, how many layers are coming off, access on tight city lots, and whether there is storm damage to document. We give free estimates and free storm inspections, so call (463) 209-8558 and we will put real numbers on your roof.

My Irvington bungalow has original slate and some rusted metal valleys. Can you match the look with metal?
Yes. We see a lot of that in Irvington and across the near-east side. We can install metal shingle or standing seam in a profile and color that respects the age of the house, and we handle the valley and flashing details that usually cause the leaks. We will also tell you honestly whether a repair makes more sense than a full replacement.
A storm just peeled back panels on my roof near Broad Ripple. How fast can you get out?
Call (463) 209-8558 and we will schedule a free storm and wind damage inspection as quickly as we can, usually within a day or two depending on how many calls are coming in after a system moves through. We document the damage for your insurance claim and can do temporary stabilization before permanent repairs.
What does a typical metal roof cost in Indianapolis compared to asphalt?
Metal usually runs more upfront. Installation starts around $8 per square foot, standing seam around $10, and retrofit over shingles around $7. Asphalt is cheaper on day one, but metal often lasts two to three times as long and handles hail and freeze-thaw better, which matters in this climate. We will give you a side-by-side estimate at no charge.
Do I need a permit to replace my roof in Indianapolis?
A full replacement or re-roof commonly requires a permit, and the thresholds, fees, and inspection requirements vary by jurisdiction. We pull the permit for you and schedule the inspections. For the rules that apply to your address, check the City of Indianapolis website at https://www.indy.gov/ or call the local building department before work starts.
My HOA in Fishers has design rules. Can you help with approval before we order panels?
Yes. HOA and historic district review can restrict panel profile and color, so we get that sorted before anything is ordered. We provide the product specs and color samples your board needs. On property lines, we keep work and drainage on your side and coordinate with neighbors if access is needed.
Are you insured for work on my property?
We are fully insured, with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Indianapolis?
Keep leaves and debris out of valleys and gutters, especially under the big maples and oaks. Have fasteners and flashing checked every few years, because freeze-thaw is what loosens them here. After a hail or wind event, get a free inspection rather than waiting for a stain on the ceiling. A coating can extend the life of an older panel roof.
Why choose us?

Trusted professionals in Indianapolis

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Indianapolis

All your work handled by qualified professionals in Indianapolis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

240+ Verified Client Reviews in Indianapolis

⭐⭐⭐⭐⭐ 4.9/5 · 240 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Indianapolis · Response within 24h · No commitment · ☎ (463) 209-8558

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Indianapolis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm